Cylinder Head Boltup Example
This is a standard benchmark problem on Abaqus  a mildly nonlinear static analysis on an engine block. The model simulates bolting of a cylinder head onto the engine block. Yielding of the gasket accounts for the nonlinearity of the simulation.
The model has 5,000,000+ DOF, and the solution is obtained using a direct sparse solver.
Post processing visualization of results
Simulation Code  Abaqus 2016 (Extended) 
Analysis Type  FEA 
Description  A finite element analysis of bolting a cylinder head on an engine block using Abaqus on Rescale. 
Suggested Hardware  Onyx / 4 cores 
Command 

Estimated Run Time  29 minutes 
Abaqus Car Crash Example
This is an explicit benchmark problem on Abaqus  a car crashing into a rigid wall at 25mph. The complexity, speed and dynamic nature of the impact/contact conditions is a good example of Abaqus/explicit applications. The car is modeled with a von mises material with isotropic hardening.
This model has 200,000+ elements.
Simulation Code  Abaqus 2016 (Extended) 
Analysis Type  FEA 
Description  A finite element analysis of a passenger car crashing into a rigid wall. 
Suggested Hardware  Onyx / 4 cores 
Command 

Estimated Run Time  73 minutes 
Abaqus Tire Footprint Example
This is a standard benchmark problem on Abaqus  a strongly nonlinear static analysis of a tire footprint. The model simulates mounting the tire onto the wheel, inflating it, followed by vertical loading. Large displacements, sliding contact and hyperelasticity accounts for the nonlinear nature of the model.
This model has 700,000+ DOF.
Simulation Code  Abaqus 2016 (Extended) 
Analysis Type  Static Analysis 
Description  Calculate the footprint of an automobile tire using Abaqus on Rescale. 
Suggested Hardware  Onyx / 4 cores 
Command 

Estimated Run Time  27 minutes 